Spanjaard ADF leaves a completely dry, hard film which oven cures at 250˚C in 60 minutes or at ambient temperatures in 24 hours. Also used as a protective coating resistant to nearly all alkali and acids (including concentrated Nitric acid). ADF 709 version complies with MIL-L-8937D. Available in aerosol and bulk packs.

Spanjaard Anti-Scuff Paste & Spray provides initial lubrication during running-in. Used for the pre-treatment of open gears. Available in 3 grades i.e. “Standard” - available in aerosol; 868 which is in a synthetic base for low and high temperature applications, and 845 for certain military applications when compliance with MIL-M-7866, DTD 5617 or Nato S722 is required.

Spanjaard Belt Dressing can be used on all types of rubber, leather and fabric belts. This is a high quality product. Available in aerosol and bulk packs.

Spanjaard Brake Cleaner is a heavy duty specialised spray for the removal of brake pad phenolic resins, brake pad dust and other brake pad degradation products. Contains no surface active agents or soaps. Takes a few minutes to remove brake dust, dirt, grease and brake fluid deposits.

Spanjaard CDF can be used in the food industry. For general application as a low load carrying dry lubricant.

Spanjaard Chain & Linkage Spray is a high quality semi-fluid adherent to all purpose lubricant containing molybdenum. It combines the advantages of a grease with those of a lubricating oil. Product will not drain away like a liquid. Water resistant and resists fling off. Superior product containing soluble molybdenum. Non-black. Available in aerosol only.

Spanjaard Chain Lubricant - 726A is effective up to 500˚C. Leaves no residue and will remove carbon deposits in cases where mineral oils were previously used. This product contains soluble molybdenum.

The only difference between Spanjaard 726A and Spanjaard DHT is that DHT contains molybdenum disulphide (MoS₂) and 726A contains soluble molybdenum.
 

Spanjaard Chain Oil 718 is a mineral oil-based medium viscosity chain lubricant containing MoS₂ for general application where the use of the more expensive 726A or DHT chain lubricants is not justified. Suitable up to 180˚C.

Spanjaard Cold Zinc Galvanising Spray is especially useful in cases where the galvanised coating on steel has been distributed due to welding, drilling, etc. Available in aerosol only.